產品說明 Explanation
 
■ 氖燈 Neon lamps
· 氖燈要求限流使用,需外接電阻,否則會導致燈泡損壞或爆裂。
  All neon lamps require current limitation such as a resistor in series.Failure to provide current limiting resistance will cause lamp damage and possibility of lamps to implode.
· 氖燈可根據客戶要求定制,氖燈引出線可選擇鍍銀或鍍錫。
  Neon lamps can be supplied as customers specifications. Lead wire may be tin or silver plated on request.
· 表中所列電參數為參考值,實際電參數會因使用條件的不同而變化。
  Electrical data shown in tables is only a reference standard. Actual data may be changed by different using conditions.
 
 
■ 氖燈+電阻 Neon lamps+Resistors
· 氖燈、熒光燈與電阻的連接可分為:電焊接、端子焊接及錫焊。
  Assemblies incorporating a wire terminal neon or fluorescent lamp with series resistor, if required,extended single conductor lead wires can be produced with butt welded,crimped or soldered joints.
· 加工尺寸是客戶為實際應用所指定的參數。
  Dimensions are specified to suit the particular application by customer.
· 氖燈加電阻之間的尺寸一般至少為4毫米。
  Dimensions between neon lamp and resistor is normally 4mm min.
Dim Description Min. Max.
A  Lamp Diameter 3 6.4
B  Electrode Length 3 9.5
C  Lead wire Length 4 ---
D  Lamp Length 8.5 25
E  Lead wire to Resistor 4 ---
F  Resistor Lead Length 0 28
G  Overall Length of Lead 7.5 ---
R  Resistor Length(1/4W) 3.5 6.5

 

广东好彩1最新开奖结果查询